manualshive.com logo in svg

Accu-Chek Compact, User Manual

Share
Download
Accu-Chek Compact User Manual Download Page 34

63

Blood Sugar T

esting

Do not open the test drum compartment when the 

motor is running.

The Accu-Chek Compact

™

meter turns off 

automatically after five minutes of nonuse. After a 
blood sugar result has been displayed, the meter turns
off automatically after 60 seconds.

If the display goes blank before the test strip is   

released, press the      

TEST

button to release the 

strip and turn the meter off.

Retain the vial in which the test drum came 

until you have used up the last test strips. When
you perform a control test, you will need to refer 
to the list of expected values printed on the test
drum vial label.

Do not reuse a test strip that has been completely 

released from the meter.

62

Running a Blood Test

7. Holding the meter

straight up and down,
press the      

TEST 

button to turn the 
meter off and release
the test strip.

8. Dispose of the used test

strip. Place the lancet 
in a  puncture proof
container with a lid,
such as a sharps con-
tainer or a coffee can.

361-11264 CMPCT Manual (Eng)  8/8/02  3:46 PM  Page 64

Summary of Contents for Compact





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands