Accton Technology VS4512DC Management Manual Download Page 237

Page: 237 / 334

Interface Commands

4-91

Example

The following example clears statistics on port 5.

show interfaces status

This command displays the status for an interface.

Syntax

show interfaces status

[

interface

]

interface

•

ethernet

unit

port

unit

- This is device 1.

port

- Port number.

•

port-channel

channel-id

(Value: 1)

•

vlan

vlan-id

(Range: 1-4093)

Default Setting

Shows the status for all interfaces.

Command Mode

Normal Exec, Privileged Exec

Command Usage

If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see “Displaying
Connection Status” on page 3-39.

Console#clear counters ethernet 1/5
Console#

Summary of Contents for VS4512DC















































































































































































































































































































































Search results

Summary of Contents for VS4512DC

Reviews:

Accton Technology VS4512DC, Management Manual, Page: 237 / 334

Search results

Summary of Contents for VS4512DC

Reviews: