Accorroni FR-FC-FCO-FCR Series, Technical Information

Page: 30 / 34

pag. 29
wash the filter under running water and wait for it
to dry completely before re-insertion.
If the filter material starts to show signs of wear
after a few periodic cleanings, it should be
replaced to ensure fully effective functioning. Do
not throw the old filter away carelessly, but
dispose of it in an appropriate rubbish
container.
Re-insert the filter ensuring that it is correctly
fixed using the holders.
WARNING! Never use the fan heater without
the filter in place as moving parts or parts
under tension and/or at high temperature
would be accessible, especially to children!
There would also be less protection against
dust both for the fan and for the heat
exchanger with a resulting loss of efficiency
in the appliance.
8.2 PERIODIC CHECKS ON THE FAN
HEATER
In order to reduce possible problems to the
minimum and to keep the fan heater in perfect
working order, thus ensuring maximum efficiency
at the lowest costs, it is advisable to have a
general check carried out by a specialist at
the start of every season of functioning. This
check should include cleaning the heat exchange
system, the fan, the filter and the condensation
tray. The latter should be thoroughly cleaned to
avoid formation of mould or other bacteria where
there is stagnant water.
8.3 POSSIBLE PROBLEMS
Any repair operations should be carried out
by qualified personnel.
In the case of breakdown, contact the nearest
Service Centre. The name can be obtained
directly from Accorroni S.r.l - Numero Verde 800-
017089.
Before seeking assistance, ensure that:
a) the electricity supply is correctly connected;
b) the heat generator, cooling system and
regulatory controls in the plant are all working
normally;
c) any controls on the appliance (air temperatu-
re thermostat, trip thermostat, etc.) are
working normally;
d) there are no obstructions to either air intake or
outlet flow.