Abekas Dveous/MX-Manual Conventions
1-3
1
Start Here
Index
Contents
Manual Conventions
■
Control Panel keys are called “buttons” to avoid confusion with the video
keying process.
■
Names of Control Panel buttons appear in bold capital letters: the
3D
TRANS
button, the
RUN
button, etc.
■
Menu names are capitalized: the Warp menu, the Input menu, etc.
■
Menu functions are noted in bold upper and lower case italicized letters: the
Locate
function, or simply
Locate
.
■
Names of function parameters are noted in bold upper and lower case let-
ters:
H Loc
. or
Z Rot.
If a parameter can only be changed by turning its
associated softknob, it is noted by the parameter name and the word “soft-
knob”: the
Loop
softknob. Otherwise, softknobs appear in left to right
order as softknob A, softknob B, softknob C, and softknob D.
■
“Select” means to highlight a menu item for use by pressing or toggling its
menu softkey.
■
A sequence of button presses is noted by long dashes (—) separating the but-
tons:
MODIFY
—
ALL
—
ENTER
. Holding one button down and press-
ing another appears with a plus (+). For example, holding
CLEAR
and
pressing the
3D TRANS
button appears as
CLEAR + 3D TRANS
.
■
Depending on your input and channel configurations, a channel can process
a video signal, a key signal or a drop shadow. This manual uses the word
image
generically to indicate the channel's source (video, key, or shadow).
