30
English
Appendices
!
Make sure the projection screen is between distance 4.9 to 39.4 feet
(1.5 to 12.0 meters) from the projector. See page 13.
Problem: The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
!
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
!
If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio in the on screen menu.
Problem: Lamp burns out or makes a popping sound
!
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the “Replacing the Lamp”.
Problem: LED lighting message
Steady light =>
No light =>
Message
Power-LED
Lamp-LED
Temp-LED
(Green)
Standby state (Input power cord)
Flashing 0.5Hz
Warming
Flashing 1Hz
Lamp lighting/Power on
Power off (Cooling)
Error (Lamp fail)
Flashing 2Hz
Error (Thermal fail)
Standby
mode
Thermal fail
Flashing 1Hz
Flashing 0.5Hz
Recovered
Flashing 0.5Hz
Operation
Mode
Thermal
fail
T<3min.
(Fan cooling)
T>3min.
(Fan off)
Flashing 0.5Hz
Recovered
Flashing 0.5Hz
Error (Over temp.)
Flashing 0.5Hz
Error (Fan fail)
Flashing 0.5Hz
Error (Lamp breakdown)
Flashing 1Hz
Flashing 0.5Hz
Lamp fail retry
Flashing 1Hz
Flashing 1Hz
