ACCO Brands ACCOLIFT CLH, Instruction Manual For Installation / Operation / Maintenance / Parts

Page: 3 / 98

3
9
20
21
24
32
34
1.1. Mechanism group
1.2. Working environment data
1.3. Hook Suspension Series, (three phase)
* Specification & Dimensions
1.3.1 Motor Trolley mounted series (three phase)
* Specification & Dimensions
1.4. Hook Suspension Series, (single phase)
* Specification & Dimensions
1.4.1 Motor Trolley mounted series (single phase)
* Specification & Dimensions
1.5. Low Headroom Series
* Specification & Dimensions
4.1. Checking of product
4.2. Installation process
4.2.1. Checking of electricity
4.2.2. Installation of "Bolt with vent hole"
4.2.3. Installation of Chain Container to hoist body
4.2.4. Oil lubrication on load chain and onto chain container
* Maximum Chain-Lift-Length, according to each Chain Container
4.2.5. Checking Load Chain after installation
4.2.6. Incorrect Phase Checking
4.3 Installation of the motor trolley mounted series
4.3.1 How to install trolley on the runway I-Beam.
* parts to adjust i-beam width
* how to set up the i-beam width of motor trolley
* applied collar numbers for each trolley capacity on i-beam.
4.3.2 How to connect electric power source
4.4. Install start up
6.1. Electrical connection
6.2. Chain container
* How to install Chain Container
6.3. Chain stopper in the chain container
6.4. Chain stopper rubber bumper
6.5. Load chian
6.5.1. Measurment of Wear and Replacement of the chain
6.5.2. Checking chain alignment (the welded part outward from the center)
6.6. Hook
6.6.1. Measurement of the wear on the hooks
3.1. Warning and Caution
3.2. Name plates and labels on products.
2.1. Trolley series and Classification of electric wiring
Features
General description of manual
Safety precautions
Installation
Maintenance and servicing
Precaution during operation