Acclaim Lighting Pixel Bar, User Manual

Page: 4 / 24

2
www.acclaimlighting.com
INTRODUCTION
WELCOME
Welcome to the Pixel Bar range from Acclaim Lighting. These aluminum bodied wet location
(IP66) fixtures are designed for direct view applications, indoor or outdoor. Available in 1’ and
4’ lengths these robust mains powered units can be connected in series to greatly simplify
installation. In each length, a choice of either Spectrum RGBW (including 3000K white)
or Dynamic White (2700 to 6000K) combined emitters is available. There are two styles of
diffused lens/beam angle available (determined at manufacture):
•
180º diffused round, or
•
120º diffused flat.
Pixel Bar fixtures are controlled by DMX and are initially configured by RDM, using a tool
such as the Acclaim Lighting XMT-350.
The Pixel Bar models provide a choice of emitter grouping modes:
1’ models - Eight emitters arranged as:
•
8 separate emitters,
•
2 groups of four emitters,
•
4 groups of two emitters, or
•
1 group of eight emitters.
4’ models - Sixteen emitters arranged as:
•
16 separate emitters,
•
2 groups of eight emitters,
•
4 groups of four emitters,
•
8 groups of two emitters, or
•
1 group of sixteen emitters.
Spectrum RGBW models require four DMX channels per emitter/group while DW versions
need only two channels per emitter/group. The overall number of DMX channels required
for total fixture control is directly determined by the chosen grouping mode
(DMX
Personality)
. See pages 6 to 13 for further details.
SAFETY
•
Ensure that the power input is supplied from a correctly fused, earthed and
environmentally protected location.