background image

2

www.acclaimlighting.com

INTRODUCTION

WELCOME

Welcome to the Flood One EO range from Acclaim Lighting, a small family of aluminum 
bodied IP66-rated exterior LED flood fixtures.
The Flood One EO family fully embraces 
Acclaim Lighting’s Modular Systems 
(AMS) design standard; AMS allows 
a wider choice of internal and external options to be configured in our Los Angeles 
headquarters and delivered in industry-leading time. There are numerous emitter options, 
together with a native beam angle of 10

O

, adjustable using a range of spread lens options to 

suit your installation:

 

2700K, 3000K, 3500K or 4000K (all with Color Rendering Indexes of more than 80),

 

10º standard with 20º, 40º, 60º, 90º x 60º or 10º x 60º optional spread lenses.

Additionally, factory fitted half and full snoots allow the light output to be shaped further. 
Control is achieved using the industry standard 0-10V sink format and, with the addition of 
the optional Acclaim Lighting ZDM 6 and Aria units (see page 9), you can add remote 
wireless connectivity to the list of abilities within the Flood One EO range.  
The internal auto-sensing power supply within each unit can accept mains inputs between 
100 to 277VAC at 50 or 60Hz. Total power consumption is just 60W peak, 55W steady state. 

SAFETY

 

When fixtures are mounted off-ground, ensure they are securely fitted to an appropriate 
mounting surface.  

 

Ensure that the power input is supplied from a correctly fused, earthed and 
environmentally protected location.

MAINTENANCE

CAUTION: Always isolate mains power before starting maintenance operations.

 

Ensure that all mounting (and device) screws/bolts are fully tight and free of corrosion.

 

Ensure there is no deformation to the housing, lenses or fixing points.

 

Check that all power supply cables are free from physical damage or material fatigue.

 

Use only genuine spare parts supplied by Acclaim Lighting.

CLEANING

 

Use a moist, lint-free cloth when cleaning each fixture.

 

Never use alcohol or solvents.

Summary of Contents for Flood One EO Series





















Reviews: