7
www.acclaimlighting.com
CONNECTING AND CONTROLLING FLEX TUBES
Flex Tube Mini strips operate at 24VDC and consume 1.37W per foot (or 4.5W per meter).
Each strip is supplied with an injection molded 16.4’ (5m) feed cable with bare tails.
Connection cables (not supplied) used to link Flex Tubes to the power/driver unit should
follow these guidelines:
•
Up to 40 feet (12m)
18 AWG (0.823mm
2
)
•
Up to 100 feet (30.5m)
14 AWG (2.081mm
2
)
•
Up to 180 feet (55m)
12 AWG (3.309mm
2
)
In all cases, ensure that the voltage drop at the fixture end of the link cable is no greater
than 8% (1.92V) of the original 24VDC supply.
APS-300-24-IP (NON-DIM)
Up to four 15 meter Flex Tube
Mini strips can be run from a
single APS-300-24-IP power
supply unit.
Link cables require 2 cores. See
AWG recommendations above.
Mains input
(115-230VAC
47-63Hz)
APS-300-24-IP
power supply
unit
Summary of Contents for Flex Tube Mini
Page 1: ...Flex Tube Mini User guide...
Page 2: ......
Page 17: ......
Page 18: ...www acclaimlighting com...
