background image

2

www.acclaimlighting.com

INTRODUCTION

WELCOME

Welcome to Flex 120 from Acclaim Lighting. Flex 120 is a low profile, exterior rated linear 
LED strip that can be directly powered from AC mains dimmers to fit seemlessly with 
existing control systems. Fully sealed lengths are supplied from 1.64 feet (0.5m) up to 65 feet 
(20m), with custom lengths also available to order. As an integral part of each installation, all 
Flex 120 strips must be mounted and protected within matching aluminum channels (two 
styles and three lengths available). Matching diffusion lenses are also available.   
DMX or 0-10V control can be added by using the optional Acclaim Lighting UDM unit.
A choice of of emitters with white color temperatures from 2700K to 5000K is offered, in 
addition to saturated single colors.  

SAFETY

 

The supply circuit must be fed via a Ground-Fault Circuit Interrupter (GFCI) / Residual 
Current Device (RCD) breaker. 

 

Ensure that the power input is supplied from a correctly fused and environmentally 
protected location.

 

This product is rated at IP66 for wet and dry locations, however, it must not be installed 
where water can accumulate.

 

Ensure that each Flex 120 strip is fully protected within matching aluminum mounting 
channels.  

MAINTENANCE

CAUTION: Always isolate mains power before starting maintenance operations.

 

Ensure that all mounting (and device) screws/bolts are fully tight and free of corrosion.

 

Ensure there is no deformation to the housing, lenses or fixing points.

 

Check that all power supply cables are free from physical damage or material fatigue.

 

Use only genuine spare parts supplied by Acclaim Lighting.

CLEANING

 

Use a moist, lint-free cloth when cleaning each fixture.

 

Never use alcohol or solvents.

Summary of Contents for Flex 120















Reviews: