8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CONNECT CHARGER TO MAINS POWER SUPPLY.
1. Insert the plug into the mains power supply.
2. Switch on the power supply.
• The “POWER” LED will illuminate.
CHARGER SETUP
1. Press the MODE button repeatedly to select the mode you want to use
(See “Charging Modes” on page 8.) for a full description.
• The LED adjacent to the selected made will be illuminated.
• If the Mode button is pressed again during charging the charger will
switch to the next charging mode and will function in that mode.
• Once the battery is fully charged and if the charger remains
connected, the charger will switch to trickle / maintenance charge
mode and will remain in this mode even if the user selects another
mode. This protects the battery from being damaged
2. When the “FULL” LED is lit and maintenance mode is not required,
disconnect the charger from the power supply, remove the clamps from
the battery in the reverse order they were fitted.
CHARGING MODES
1
This mode is suitable for charging small batteries with a capacity
below 20Ah.
1. Press the MODE button until the LED adjacent to the
motorcycle symbol is illuminated.
• Charging will start and the 'charging' LED will illuminate.
• When the battery is fully charged the 'charging' LED will
extinguish and the 'fully charged' LED will illuminate.
2
This mode is mainly for charging large batteries with a capacity of 8-
20Ah in normal conditions.
1. Press the MODE button until the LED adjacent to the car
symbol is illuminated.
• Charging will start and the 'charging' LED will illuminate.
• When the battery is fully charged the 'charging' LED will
extinguish and the 'fully charged' LED will illuminate.
Summary of Contents for CBO9-6/12
Page 12: ......
