39 / 58
Reference: MI211062
komplet 211062
Version: 00
39 / 58
8.9-Moving the platform horizontally
For the displacement of the platform two operators are needed, one at the level of suspension
structure and another on the platform. When working at the level of the suspension they must be equipped
with a harness that is anchored to a anchor point with sufficiently capacity load.
1-Place the platform about 30cm above ground level.
2-Remove the counterweights from the safety wire ropes.
3-Leave the safety wire ropes loose enough.
4-Support the platform on the ground and leave the work wire ropes loose.
Never remove the wire
ropes from the suspension structure.
5-Move the platform until is in the vertical of the suspensions.
6-
Avoid placing the platform by means of elevators
; It could cause a dangerous swaying or a
deterioration of the material.
7-Tension the work wire ropes by pressing the UP button.
8-Lift the platform about 30cm.
9-Tension the safety wire ropes by hand and hook the counterweights to each safety wire rope.
Carefully wind the unused length of wire rope in the winders.
