1
1. Features introductions
All-in-one design far easy installation. The lock itself would not have any residual
magnetism.
Adjustable width (59mm-89mm) far use of different sliding doors' slots.
Armature bracket which can be adjusted horizontally or vertically for better fitting.
Voltage input design to fit all sliding doors (DC12V).
The lock itself is equipped with release switch and indicator for better maintenance of
the sliding doors.
Built-in photocoupler connects with egress delay circuit push button point.
Maximum holding force of 80kg/ 175 lbs.
Currents: 150mA {depend ing on DC12V testing).
Dimensions:
Magnetic lock body: 118 mm (L) x 66mm (W) x 53.5mm (H).
Armature: 63mm (L) x 38mm (W) x 126.5mm (H).
Total weight: 1. 25kg.
2.
Model series
5PIN
connector without lock status point.
7PIN
connector with lock status point.
3. Panel
3PIN connector: To set either 110V or 220 V
5 PIN connector: DC12, external push button,
triggers to open door.
7 PIN connector: DC12 V, external push
button, triggers to pen door, lock status point.
Release switch: For better maintenance of
sliding door.
Indicator (red):
Normal state: Blinking
Door opening: Light on
