Access FLOW X, User Manual

Page: 47 / 52

6.3 SiGNALS ON JOYSTiCK USER
iNTERFACE
6.3.1 SiGNALS WHEN OPERATiNG THE STAiRLiFT
Signal Meaning Action
Constant green
light The joystick has been
operated and the stairlift is
moving.
-
Constant green
light + start sound The joystick has been
operated and the stairlift
starts moving
-
Blinking green
light for 5 seconds
+ arrival sound The stairlift has arrived at
the halt point Release the joystick and fold it
down
Blinking green
light for 5 seconds The stairlift doesn’t move:
the joystick is pushed in the
direction of the halt point
where the stairlift is already
located (end of the rail) Push and hold the joystick in
the other direction to start the
stairlift
Blinking green
light and warning
sound when folding The seat or footrest is being
folded or unfolded
-
Constant orange
light + warning
sound Not all conditions are met:
the stairlift does not start
These failures can be
resolved by the user
Check and meet all conditions:
- chair and footrest
completely unfolded
- armrests locked in correct
position
- safety belt fastened
- Key lock in locked state
Operate the joystick twice to
start the stairlift
Constant orange
light + warning
sound The anti-squeeze safety
function is activated
because the stairliift has
encountered an obstacle and
has stopped Move the stairlift in the
opposite direction to a parking
point. Before you use the
stairlift, make sure that the
stairs are free of obstacles
Blinking orange
light 2 times Attendant control or
emergency lowering button
is active
-
Access Flow X stairlift - User Manual - Signals 43