Access Security Products KP-KR16, User Manual

Page: 9 / 13

9
To add Card Users. (Method
1)
This is an easy way to enter
cards with auto-generated ID
numbers
The ID number will start from
1 if no user has been
programmed
1 Read card #
Card can be added continuously without exiting programming mode
To add Card Users. (Method
2)
This is the alternative way to
enter cards using User ID
Allocation. In this method a
User ID is allocated to a card
Only one user ID can be
allocated to a single card
1 ID number # Card #
The ID number can be any number among 1 - 1100
To add a series cards users
– Block Enrollment
The card number must be
consecutive
(This operation is only for
Zone 1)
5 ID number # 8 digits Card number # Card quantity #
Card quantity is between 1-1100
Of the 8 digits card number, it is the last 8 digits on the card
To delete Card users by
cards
Note: Users can be deleted
continuously without exiting
programming mode
2 Read Card #
The device can automatically identify the card of Zone 1 or Zone 2
To delete Card users by user
ID
This option can be used when
a user has lost their card
2 User ID #
To delete card users by card
number
9 Input 8 digits Card number #
Cards can be deleted continuously without exiting from programming
mode
To set users for Zone 2. ( 3 2 2 # )
To set Pin user for Zone 2 is the same as Zone 1, only the ID number is 1101-1200 for Zone 2.
To set Card user for Zone 2 is the same as Zone 1, with the exception of adding Card users with
auto-generated ID numbers (Method 1) as below
ACCESS
SECURITY
PRODUCTS
LTD