36
Changing Oil
* 1. Start the engine and let it warm up for 2-3 minutes, and then
turn off the ignition switch and remove the oil filling cap.
2. Remove the oil pan drain plug at the bottom of the engine.
Turning clockwise the plug to tighten it, and turn
counterclockwise to loosen it. Use a container to keep the
drained oil.
3. After oil is drained up, tighten the oil pan drain plug. Then, fill
in correct oil with appropriate volume.
4. Visually check that the oil level is between the upper and
lower limits. Then, tighten the oil filling cap.
5. The tightening torque for the oil pan drain plug is 3.0 kg-m.
Note:
*To reduce the risk of getting burn, do not change oil when the
engine is still very hot.
Oil filling cap
Oil pan drain plug
