Page
9
of
18
Copyright © Access-IS 2019
3. Installation
3.1 Unpack the BGR750
Unpack the BGR750 and ensure that you have the following items:
•
Advisory notice card.
•
BGR750 device.
•
Serial and power cable.
or
•
USB and power cable.
•
Universal 12 V AC power supply.
Report any missing items or damage immediately to your Sales Representative.
3.2 Connect the BGR750
Connectors for host, printer, Ethernet, USB and mini HDMI are located on the back of the BGR750.
Note: The over-moulding for the host cable is colour-coded green to match label under the
connector. The over-moulding for the printer cable is colour-coded blue to match label under the
connector. Ethernet, USB and mini HDMI ports are available by firmware upgrade.
To connect the BGR750:
1. Switch off the computer.
2. Push the RJ50 connector into the host socket on the back of the BGR750 until you hear a click.
3. If using a serial cable, connect the serial connector to a COM port on the computer and
finger-tighten the two thumbscrews to secure the connector to the port.
Figure 2: Serial connection
