AX5 3’4” Exbury
A
750mm x 750mm
Qty: 4
B
750mm x 500mm
Qty: 2
C
750mm x 500mm
Qty: 8
BX5 5’0” Exbury
A
750mm x 750mm
Qty: 4
B
750mm x 500mm
Qty: 3
C
750mm x 750mm
Qty: 8
CX5 6’5” Exbury
A
750mm x 750mm
Qty: 4
B
750mm x 500mm
Qty: 4
C
750mm x 965mm
Qty: 8
Top and end glass (A & B) have no handles
P16
FITTING THE GLASS
CENTRE STAGING
If you wish to fit the staging glass (453mm x 700mm) sheets place these on the centre staging rails before glazing the
frame. Centre staging is in glass packs GT-SWA or GT-SWB.
FITTING HANDLES
Fit the handles to the glass before fitting into the frame. Right hand panels always have a single handle on the right
hand side of the sheet. Left hand panels have two handles, one on each side.
FITTING THE GLASS
To fit the glass push the sheet into the deeper top channel, then lower into the bottom channel (A). Make sure the glass
is firmly in the bottom channel before letting go. When putting the sheets in the frame, put the first sheet in at the right
hand end. The second sheet will fit in front of the first sheet and overlap the first panel by approx. 1” (2cm).
SLIDING THE FRONT AND REAR GLASS
When closed, both panels will tuck behind the corner trims to keep them secure. Before sliding the right hand panel
open, slide the left hand panel open by approx 1” to release it from behind the corner trim.
B
B
C
C
C
C
A
A
C
C
C
C
Centre staging fitted
A. Fitting the glass
Glass in channel with two
Roof glass overlapping