P12
FITTING THE HANDLES
FITTING THE HANDLES
top edge of
glass pane
handle
1
5
m
m
Work the handle fully
onto the glass.
DO NOT lift the glass by
the handle.
1
TIP: Do not try and
slide the 'clip' on from
the top or bottom
First w ipe the edge
of the glass w here
the handle w ill fit
w ith a w et cloth.
Then slide handle over
edge of the glass,
starting at the top
corner of the handle.
2
First wipe the edge of the
glass where the handle will fit
with a wet cloth.
Then slide the handle over
the edge of the glass, starting
at the top corner of the
handle.
handle
Work the handle fully onto the
glass.
DO NOT
lift the glass by the
handle
Sheets requiring one handle
1
Sheets requiring two handles
1
SEE PAGE 12 FOR WHICH GLASS SHEETS
NEED HANDLES
‘B’
sheet
‘C’
sheet
2
2
When fitting the
handles
, place the glass
on a table or timber battens.
NEVER PLACE THE GLASS DIRECTLY ON CONCRETE OR SLABS
WARNING!
Toughened glass if broken will fragment safely.
If the edges are knocked or chipped the glass will spontaneously
fragment. This is a natural occurrence due to the toughening
process. Care should be taken when moving or cleaning, not to
damage the edge of the glass.
When placing the glass in the frame, ensure that the glass is
securely placed in the runners before letting go of the glass.
handle
HANDLES
The right hand glass sheets
always have 1 handle.
The left hand glass sheets
always have 2 handles.
Work on handle from
side edge
Handle fitted with 15mm
gap
Sheet with 2 handles
Sheet with 1 handle
TIP:
Always grip the
handle in the CENTRE
when sliding
TIP:
Do not try and slide
the handle on from the
top or bottom
WARNING
If broken, toughened glass will fragment safely.
If the edges are knocked or chipped the glass will
spontaneously fragment. This is a natural occurrence due
to the toughening process. Care should be taken when
moving or cleaning, not to damage the edge of the glass.
When placing the glass in the frame, ensure that the glass
is securely placed in the runners before letting go of the
glass.