Manual PCIe-DA16-6
9
Hardware Installation
1.
Make sure to set switches and jumpers from either the Option Selection section
of this manual or from the suggestions of the Settings Program.
2.
Do not install card into the computer until the software has been fully installed.
3.
Turn OFF computer power AND unplug AC power from the system.
4.
Remove the computer cover.
5.
Carefully install the card in any available PCI Express expansion slot (you may
need to remove a backplate first).
6.
Inspect for proper fit of the card and tighten the mounting bracket screw. Make
sure that the card mounting bracket is properly screwed into place and that there
is a positive chassis ground.
7.
Install an I/O cable (or an ADAP37F-MINI) onto the card’s bracket-mounted male
connector.
8.
Replace the computer cover and turn ON the computer which should auto-detect
the card (depending on the operating system) and automatically finish installing
the drivers.
9.
Run AIOWDMFind.exe to complete installing the card into the registry (for
Windows only) and to determine the assigned resources.
10.
Run one of the provided sample programs that was copied to the newly created
card directory to test and validate your installation.
If the card is not detected, go to Device Manager and check for the card showing up as
an unknown "PCI Device" in “Other devices”; if you find it, right-click and "Update Driver"
and search automatically; this should resolve any issues.