Acces I/O products USB-DIO-48 User Manual Download

Page: 5 / 17

Manual USB-DIO-48

Chapter 1: Introduction

Features

• 48 lines of digital I/O

• High-speed USB 2.0 device, USB 1.1 backwards compatible

• Six (6) 8-bit ports independently selectable for inputs or outputs

• All I/O lines buffered with 32 mA source, 64mA sink current capabilities

• I/O buffers can be enabled or tri-stated under program control

• Drivers and sample application provided

• Jumper selectable I/O pulled up to 5V (via 10K

Ω

), pulled down to ground or floating

• Jumper selectable power provided via USB cable or external power supply for higher

current sourcing capabilities

• Resettable fused +5VDC output per I/O connector

• Standard 50-pin IDC-type shrouded connectors with key

• PC/104 size board (3.550 by 3.775 in.)

• Rugged industrial enclosure

• Compatible with Industry-Standard I/O Racks such as Gordos, OPTO22, Potter &

Brumfield, etc.

Applications

• Automatic Test Systems

• Laboratory

Automation

• Robotics

• Machine

Control

• Security Systems, Energy Management

• Relay Monitoring and Control

• Parallel Data Transfer to PC

• Sensing Switch Closures or TTL, DTL, CMOS Logic

• Driving Indicator Lights or Recorders

Summary of Contents for USB-DIO-48


















Search results

Summary of Contents for USB-DIO-48

Reviews:

Related manuals for USB-DIO-48

Brands by name

Popular brands

Acces I/O products USB-DIO-48, User Manual

Search results

Summary of Contents for USB-DIO-48

Reviews:

Related manuals for USB-DIO-48

Brands by name

Popular brands