ACCES I/O Products, Inc.
MADE IN THE USA
mPCIe- and M.2-AIO16-16F Family Manual
2
Rev B6d
C
HAPTER
1:
Q
UICK START
It is recommended that you install the software package before
installing the PCI Express Mini (mPCIe) or M.2 card in your
computer. Install the software
1
using our stand-alone installer
downloaded from the website.
Run the installer you downloaded and follow the prompts to install
the software for your device.
Please note: during the installation you may be prompted regarding
the installation of non-WHQL-certified drivers; please carefully
confirm the digitally signed source of the drivers and accept the
installation.
Once the software has been installed, shut down your system and
carefully install the card.
Re-start your system. Once the computer finishes booting, your
new I/O should already be installed and ready for use; you can
confirm this by launching Device Manager and looking under the
“Data Acquisition” section. If, for any reason, the device displays a
warning triangle, right-
click and select “Update Driver”.
1
In Linux or OSX please refer to
C
HAPTER
2:
I
NTRODUCTION
This manual is applicable to both the PCI Express Mini Card (mPCIe)
and M.2 card versions of this product. The registers, I/O and
performance specifications are the same.
•
PCI Express Mini Card (mPCIe) type F1 or M.2 type 2280/2260,
with latching I/O connector
•
2× 16-bit, Bipolar, Differential, A/D converters sampling at up to
1MHz, simultaneously
•
Software selectable as 16+0, 8+4, or 0+8 (Single-Ended +
Differential Inputs)
•
7 channel-by-channel programmable differential input ranges
from ±0.3125V up to ±12V (48Vp-p)
•
A/D starts via software, external input, or periodic timer
•
A/D “Scan Start” mode optimizes inter
-channel timing
•
High impedance, 8-
channel input: 1 MΩ
•
32k FIFO plus DMA for efficient, robust data streaming
•
2× Digital I/O pins with flexible secondary functions
•
Four 16-bit analog outputs
•
5 per-channel programmable ranges: 0V to 5V, 0V to 10V,
±2.5V, ±5V, ±10V
•
Outputs Drive ±10mA Guaranteed
•
Onboard Watchdog with status output
•
RoHS compliant standard
C
HAPTER
3:
H
ARDWARE
This manual applies to the following models:
VENDEV
M.2-/mPCIe-AIO16-16F mPCIe, A/D 16-bit, 2Msps, 4 D/A
494F:C0E8
M.2-/mPCIe-AIO16-16A mPCIe, A/D 16-bit, 1Msps, 4 D/A
494F:C0E9
M.2-/mPCIe-AIO16-16E mPCIe, A/D 16-bit, 500Ksps, 4 D/A
494F:C0EA
M.2-/mPCIe-AI16-16F
mPCIe, A/D 16-bit, 2Msps
494F:80E8
M.2-/mPCIe-AI16-16A
mPCIe, A/D 16-bit, 1Msps
494F:80E9
M.2-/mPCIe-AI16-16E
mPCIe, A/D 16-bit, 500Ksps
494F:80EA
M.2-/mPCIe-AIO12-16A mPCIe, A/D 12-bit, 500Ksps, 4 D/A
494F:C058
M.2-/mPCIe-AIO12-16
mPCIe, A/D 12-bit, 250Ksps, 4 D/A
494F:C059
M.2-/mPCIe-AIO12-16E mPCIe, A/D 12-bit, 100Ksps, 4 D/A
494F:C05A
M.2-/mPCIe-AI12-16A
mPCIe, A/D 12-bit, 500Ksps
494F:8058
M.2-/mPCIe-AI12-16
mPCIe, A/D 12-bit, 250Ksps
494F:8059
M.2-/mPCIe-AI12-16E
mPCIe, A/D 12-bit, 100Ksps
494F:805A
The mPCIe-AI* models are full-
length “F1”
mPCIe devices.
The M.2-AI* models are 2280 M.2 with a breakaway for 2260 use.
All units are RoHS compliant.
INCLUDED IN YOUR PACKAGE
1× mPCIe-AIO16-16F Family card
or
1×M.2-AIO16-16F Family card
Available accessories include:
CAB-mPCIe-AIO
9 inch panel-mount DB37M twisted pair
cable assembly
ADAP37F-MINI
Direct plug-on terminal board mates
with DB37M on CAB-mPCIe-AIO
LF-BRK-P9259-37
Mounting bracket for DB37M on CAB-
mPCIe-AIO
mPCIe-HDW-KIT2
Mounting hardware for 2mm mPCIe
mPCIe-HDW-KIT2.5
Mounting hardware for 2.5mm mPCIe
Contact the factory for information regarding additional accessories,
options, and specials that may be available to best fit your specific
application requirements, such as Industrial Temperature (-40°C to
85°C).
C
HAPTER
4:
C
ONFIGURATION
S
ETTINGS
All configuration of this device is performed through software; there
are no jumpers or switches to set.
