background image

 

ACCES I/O Products, Inc. 

MADE IN THE USA 

mPCIe- and M.2-AIO16-16F Family Manual 

 

13 

Rev B6e 

 

which are proved to be defective during the warranty period. In 
no case is ACCES liable for consequential or special damage 
arriving from use or misuse of our product. The customer is 
responsible for all charges caused by modifications or additions to 
ACCES equipment not approved in writing by ACCES or, if in 
ACCES opinion the equipment has been subjected to abnormal 
use. "Abnormal use" for purposes of this warranty is defined as 
any use to which the equipment is exposed other than that use 
specified or intended as evidenced by purchase or sales 
representation. Other than the above, no other warranty, 
expressed or implied, shall apply to any and all such equipment 
furnished or sold by ACCES. 

TERMS AND CONDITIONS 

If a unit is suspected of failure, contact ACCES' Customer Service 
department. Be prepared to give the unit model number, serial 
number, and a description of the failure symptom(s). We may 
suggest some simple tests to confirm the failure. We will assign a 
Return Material Authorization (RMA) number which must appear 
on the outer label of the return package. All units/components 
should be properly packed for handling and returned with freight 
prepaid to the ACCES designated Service Center, and will be 
returned to the customer's/user's site freight prepaid and 
invoiced. 

COVERAGE 

FIRST THREE YEARS: 

Returned unit/part will be repaired and/or 

replaced at ACCES option with no charge for labor or parts not 
excluded by warranty. Warranty commences with equipment 
shipment. 

FOLLOWING YEARS

: Throughout your equipment's lifetime, ACCES 

stands ready to provide on-site or in-plant service at reasonable 
rates similar to those of other manufacturers in the industry. 

EQUIPMENT NOT MANUFACTURED BY ACCES  

Equipment provided but not manufactured by ACCES is warranted 
and will be repaired according to the terms and conditions of the 
respective equipment manufacturer's warranty. 

DISCLAIMER 

The information in this document is provided for reference only. 
ACCES does not assume any liability arising out of the application 
or use of the information or products described herein. This 
document may contain or reference information and products 
protected by copyrights or patents and does not convey any 
license under the patent rights of ACCES, nor the rights of others. 

PCI EXPRESS MINI CARD STANDARD NOTICE AND 
EXCEPTION 

The mPCI-DIO-24S family of devices are fully compliant with PCI 
Express Mini Card v1.2. 

Summary of Contents for M.2-/mPCIe-AI12-16














Reviews: