Accent 800/800-D Getting Started
21
Disabling and Enabling the Toolbox
When you disable the Toolbox, you can still use your vocabulary to speak, but the Tools key will not take
you from Core or your Home page to the Toolbox without entering a password.
To Disable the Toolbox
1.
Select the
Tools
key and then select the
Toolbox
key.
2.
Select
Maint Menu
.
3.
Select
Disable Toolbox
. Under “Toolbox”, select
Disable
. The first time you disable the Toolbox, you
must enter a password. Type a password and select
OK
.
Important!
Remember your password. You’ll need it when you want to re-enable the Toolbox. This
password will remain in effect the next time you disable the Toolbox.
4.
Select
OK
and select
OK
again.
To Enable the Toolbox
1.
Select the
Tools
key.
2.
Enter your password and select
OK
.
3.
Select the
Toolbox
key.
4.
Select
Maint Menu.
5.
Select
Disable Toolbox
. Under “Toolbox”, select
Enable
.
6.
Select
OK
and select
OK
again.
Backing up Your Vocabularies
1.
Insert your flash drive into the USB port on the back of the device.
2.
Select the
Tools
key and then select the
Toolbox
key.
3.
Select
Transfer Memory Menu
.
4.
Select
Save One User Area
and touch the user area you want to back up or select
Save Entire Device
Contents
.
5.
Make sure the pre-set folder is a USB drive. If so, select
OK
. Type the file name and date (xx-xx-xx).
6.
Select
OK
and wait for the information to be transferred. When the transfer is complete, select
OK
.
