Accent 800/800-D Getting Started
12
Turning on the Device
1.
Press and hold the power button located on the top edge of the device. The green power LED will
illuminate. The LED will remain illuminated while the device is on and while the device is in sleep mode.
2.
Wait for the NuVoice® software to load. This will take about 45 seconds.
3.
First time only:
Review the NuVoice Software Agreement and select
I Agree
. The Exploration Wizard
will load.
4.
Once the Exploration Wizard loads, check the battery status level. For details, see “Charging the
Battery” on page 13.
Putting the Device to Sleep/Waking the Device
When you finish using the device for the day, put it in sleep mode overnight. To put the device to sleep,
do either of the following:
•
Quickly press and release the power button
or
•
Select the
Sleep
key in the NuVoice Toolbox
When the device is inactive for a prolonged period, it will go into sleep mode automatically. The green
power LED will remain illuminated while the device is in sleep mode. To wake the device, do either of
the following:
•
Select the Tools key on the front of the device
or
•
Quickly press and release the power button
Note:
The device may wake up if a NuEye module is attached or if Windows® updates are set to install
automatically. To preserve the charge overnight, either connect the charger or power off the device.
Transporting the device in a carry case may also wake it. In that case, power off the device.
Note:
To change power button operation in the NuVoice software, see “Managing Power Settings” in the
Accent 800 Hardware Manual
. Download the manual from
https://www.prentrom.com/support/accent
.
Restarting the Device
Recommendation:
Restart your device once per week. To restart the device:
1.
Select the
Tools
key and then select the
Toolbox
key.
2.
Select
Maint Menu
and then select
Power Management
.
3.
Select
Restart
and then select
Yes
at the confirmation prompt.
Powering Off the Device
Recommendation:
Power off the device when it won’t be used for more than a couple days or when it
will be transported in a carry case. If you plan to store it for at least a month, see “Storing Your Device”
in the
Accent 800 Hardware Manual
.
1.
Select the
Tools
key.
2.
Select the
Shutdown
option.
3.
Select
Yes
at the confirmation prompt.
