CNC Controller Specialist
19 |
P a g e
Spindle on/Spindle Off
Manually turn On /Off spindle;
Goto position X=0,Y=0,A=0 /
Set position X=0 Y=0 A=0 /
number input 0;
Go to Position Origin of WCS for X,Y,A
axis; Shift + XYA=0 to set Origin of WCS in
selected coordinate system for X,Y,A axis.
Input number of 0.
Shift + XYA=0 shortcut for X,Y,A axis set
zero
Goto Position Z=0 / set
position Z=0 / number input
dot(.) / or Number input
minus(-) with Shift key
To set the origin of WCS in Z axis with
Shift key Or Goto Z safe height of WCS or
number input dot(.)for decimal point. or
number minus(-) for negative number
entry.
Shift + Z=0 shortcut for Z axis set zero
Spindle override Decr
Spindle override value decrement. Left
Arrow key.
Spindle override Incr OR SO
100
Spindle Override increment OR Set the
Spindle override To 100 with shift key;
Right arrow key.
Feedrate override Incr OR FO
100
Feedrate override increment OR Set Feed
override to 100 with Shift key; Up arrow
key for meny browsing and file
Feedrate override Decr
Feed override value decrement; Down
arrow Key for Menu browsing Shift +
Down is shortcut for toggle between
Feed percent and Feed Actual
programmed.
Shift
Auxiliary key
Jogging speed / number input
5 / Homing Shortcut
To set the Jog speed
JogH,JogM,JogL,Jog1,Jog2,Jog3; Input
number of 5. Shift + Jog Spd shortcut for
Homing operation.