background image

Assembly Instructions / A100-L

5 Storage of new turbochargers and spare parts / ​ 

© Copyright 2022 Accelleron Industries. All rights reserved.

HZTL455311P0002_EN

Rev. B

May 2022

5

Storage of new turbochargers and

spare parts

Storage of new turbochargers and spare parts for up to 6 months

New turbochargers and spare parts can be stored in their closed packages for 6 months from the
date of delivery without additional mothballing measures.

Only dry rooms in which the relative humidity is between 40…70 % and no condensation can form are
suitable for storage.

Storage of new turbochargers and spare parts for more than 6 months

As the contents of the package are adapted as required, turbochargers may also be delivered
without a VCI label.

For parts with a VCI label on the package, the following instructions must be observed.

Fig. 7: Volatile Corrosion Inhibitor (VCI)

 WARNING

Health protection when handling VCI

VCI products are not hazardous in terms of the Ordinance on Hazardous Sub-
stances. Nevertheless, the following points must be observed when handling VCI:

u

Observe information in material safety data sheet

u

Ensure proper space ventilation.

u

Do not eat, drink or store food at the workplace while working with VCI.

u

Clean hands and face after working with VCI.

u

For more information, see 

www.branopac.com

.

Wear safety gloves to protect against mechanical hazards.

Every 6 months, the following mothballing measures are required:

u

Open package.

u

Remove VCI corrosion protection emitter from package and replace with a new VCI corrosion pro-
tection emitter of the same kind. New VCI corrosion protection emitters can be obtained from

www.branopac.com

.

u

Old VCI corrosion protection emitters must be disposed of in an environmentally compatible, pro-
fessional way and in compliance with locally applicable regulations.

u

Seal the package. The more tightly the package is sealed, the longer the protection will last.

Long-term storage of turbochargers

The turbochargers will be prepared for long-term storage if requested in the purchase order. The
package is equipped with a hygrometer (see illustration).

Page 

13

 / 

17

Summary of Contents for A100-L





















Reviews: