E1000 Series Safety and Installation Instructions
SI-00101 v2
4
Intended Use
The product is intended for use as a base station (eNodeB) in an LTE network.
It is designed to be installed outdoors but may also be installed indoors. It is not
to be sold to, installed by or operated by the general public.
Safety
General
The product must only be used for its intended purpose.
The product and antennas must be installed, serviced and replaced only by
trained and qualified personnel who are familiar with safe working practices,
local building and safety codes and, where applicable, are licensed by the
appropriate regulatory authorities.
The product must be securely fixed to a suitable structure such as a wall, a
building or a tower designed for the purpose. If a mounting pole is used, it must
be securely fixed to the building or tower before the product is fixed to it.
The product must be fixed in position using fixings that can safely bear the
weight of the product (including antennas if connected directly to the product).
The product must be installed in a position where there is minimal risk of a
person accidentally colliding with it or its antennas.
LTE antennas must be installed in a position such that the distance from them
to any person will always be at least 20 cm while the product is transmitting.
The product must be securely fixed in position before power is applied.
If installed outdoors, the product must be protected against lightning strike by
connecting it to earth using a suitable conductor.
Since E1012/CBRS is a Category A device the product can only be installed
outdoors below 6m height AGL or indoors.
The supplied Power over Ethernet Plus (PoE+) injector must be installed in an
indoor environment or in a weather-proof enclosure.