Customer Support: 1-800-377-4532
Revised: June 15, 2012 9:04 AM
Step 5
a) Remove the battery from the tricycle.
b) Flip the tricycle upside down. It should rest on
the top of the seat tube (where the seat post was
inserted previously), and on the handlebars. Be
careful not to damage any handlebar-mounted
accessories like the brake levers or throttle.
Rear-end removal:
Quick reference:
1.
Remove the rear wheels.
2.
Loosen the four carriage bolts connecting the front and rear sections of the tricycle.
3.
Slide the front and rear sections of the tricycle frame apart.
Step 1
Remove the rear wheels. You will need to use a 17mm box
wrench to loosen first the locknut, then the inner nut on
each side.
Step 2
Loosen, but do not remove, the four large carriage bolts
that connect the front section of the tricycle to the rear.
Inner nut
Locknut
