21 of 28
Accelerated Concepts, Inc. © 2013
NetReach User Guide
The following items are displayed on this page:
Current Time
— Receives a time and date stamp from an SNTP server.
Sync with host —
Updates the unit's time from the system time.
Time Zone
— Select the time zone that is applicable to your region.
SNTP Server
— Enter the address of an SNTP server to receive time updates.
SNTP synchronization (hours)
— Specify the interval between SNTP server updates.
Click
Next
after completing the setup.
The next configuration panel will complete the wizard setup after which the unit will be
operational.
The following options must be entered on this page before continuing:
SSID Choice
— The name of the wireless network service provided by the NetReach. Clients that
want to connect to the network must set their SSID to the same as that of the NetReach.
Security Mode
— Specifies the security mode for the SSID. Select the security method and then
configure the required parameters. (Options: Disabled, Open, Shared, WEP-AUTO, WPA-PSK,
WPA2-PSK, WPA-PSK_WPA2-PSK, WPA, WPA2, WPA1_WPA2, 802.1X)
Default: Disabled
NOTE:
To keep your wireless network protected and secure, you should implement the highest
security possible. For small networks, it is recommended to select WPA2-PSK using AES encryption
as the most secure option. However, if you have older wireless devices in the network that do not
support AES encryption, select TKIP as the encryption algorithm.