INSTALLATION
1. Determine installation location and verify if mount is compatible. Remove your stock rearview mirror and verify the
mount is the appropriate one for your make and model vehicle. If mount is correct, place your new “RVMDVR360” on
the existing glass mount. Run the cables down the pillar like the image below.
2. Once Mirror is in Place and the cables have been ran down the pillar, you may now begin the process of running the camera
cables to run the appropriate location in the rear of the vehicle.
Run Wires
down “A” Pillar
REARVIEW CAMERA EXTENTION PLUG
MODEL : RVMDVR360
NOTE:
If vehicle has no glass mount
a glass mount is provided for
you. Purchase Glass mount glue
seperatly.
7. Eye of the 360 camera
8. SD slot
9. Mount slides right on to
Glass mount
pt x
360
