54
5.14
Alarm-Motion Alarm
Set alarm activating, recording frame and time for motion detected on camera image. Set, while using Motion Alarm. To
use the Motion Alarm, set <m+a> at the Schedule
5.14.1. On/Off
Select whether to use motion detection activated with each channel.
5.14.2. Out
Select connected number (1, 2 or none) of output (relay) to use when the alarm activates.
5.14.3. IPS
Set no. of frames for the camera image connected while alarm activating. Each camera can be set in different no. of
frames.
5.14.4. Dwell
Set the period of recording when motion ends after motion activates. This is different from Dwell time in [Alarm In/Out]
category. The Dwell time in [Motion Alarm] category is period of recording from the point when the motion disappears after
motion activation.
5.14.5. Pre-Alarm
Set recording time just before perceiving alarm input. Pre-Alarm time is opposite of Dwell time and it records the
time before motion activates.
For example, Pre-Alarm is set as 20 seconds. If the alarms activates at 14:30:00 on 14th of February, the
recording starts from 14:29:40 on 14th of Feb.
Summary of Contents for AV304
Page 1: ......
Page 5: ......
Page 41: ...35 Input a new password After inputting password input the same password again...
