10: Traffic shaper
Traffic shaper configuration
142
Before we move to the next step, traffic shaper statistics, we need to get some traffic flowing
through the shapers. The basic flow of information is:
•
Traffic is received on the client port.
•
There is a policy or policies on the port to set the PCP on the incoming traffic, This PCP
value will then be used to map the traffic to a specific shaper or the real-time queue.
For this example we will take VLAN 100 being received on the client port and send it to
shaper-1.
Create an L2 filter for VLAN100 and apply
2. Go to Traffic > L2 filter
Then we need to use this filter in a policy on the client port
Here is an example of a policy:
Here is an example of a policy:
