2: Hardware installation
Hardware overview
10
Front panel
The front panel features different ports and status lights depending on the model.
Ethernet ports
All Ethernet ports are 10/100/1000BaseT or 10/100BaseT Ethernet, depending on the model,
supporting auto-negotiation, auto-MDIX and have RJ-45 connectors.
Each port has two indicator lights as follows:
SFP ports
All SFP ports are compliant with INF-8074 and must be connected to SFP modules that are
class 1 lasers and are compliant with IEC825-1.
Port functionality
The following table lists the capabilities of each port.
The following describes the factory default configuration settings for all ports. Use the
management web interface to change these settings as required by your installation.
Light
Solid
Flashing
Link/RX
Port is connected at the link layer.
Port is receiving data.
TX
N/A
Port is transmitting data
Model SFP
RJ-45
EE
N/A
10Base-THD/TFD
100Base-TX/TXHD/TXFD
(Auto-negotiation/Auto MDIX)
GE / TE
/ TE-R
Fiber SFP
100Base-BX10D/BX10U/FX/F
XFD/LX10
1000Base-BX10D/BX10U/LX/L
XFD/LX10/SX/SXFD/T/TFD
(Auto-negotiation)
Copper SFP
10Base-TFD
100Base-TX/TXFD
1000Base-T/TFD
(Auto-negotiation/Auto MDIX)
10Base-THD/TFD
100Base-TX/TXFD
1000Base-T/TFD
(Auto-negotiation/Auto MDIX)
