AH-TX Series Handheld Pulse Oximeter Instruction Manual
11
3.4.1 Alarm Volume Setup
Press the
Alarm Vol
to select the item, then adjust its value using the
“
” or “
“ icon. You can select from 1 to 5. The volume will be
minimum when select is 1.
3.4.2 Beep Volume Setup
Press the
Beep Vol
to select the item, then adjust its value using the “
”
or “
“ icon. You can select from 0 to 4. The volume will off when select
is 0.
3.4.3 Key Volume Setup
Press the
Key Vol
to select the item, then adjust the value using the “
”
or “
“ icon. You can select from 0 to 4. The volume will off when select
is 0.
3.4.4 Adjust the Screen Brightness
Press the
Brightness
to select the item, then adjust the value using the
“
” or “
“ icon. You can select from 1 to 5. Selecting the minimum
brightness can save power.
Caution: If the oximeter is used outdoors, or if the ambient light is
strong, set the screen brightness to a higher level.
If the user to turn off the physiological alarms totally, which may cause
the emergency event of the patient not be discovered in time. When the
alarm is completely turned off, this device should be used accompanied
by the professionals.
Fig 3-2(b) System setup window
