background image

6

ARS-2018/2018E Manual

Install ARS-2018E:

Step 1: Prepare 2 SATA hard drives of the same model.

Step 2: Unlock the 2 trays and take them out of ARS-2018E.

Step 3: Put a hard drive into each tray and aim its end to the tray’s connector.

Fasten the hard drive with screws.

Step 4: Put the 2 trays back to ARS-2018E and lock them.

Step 5: Set a proper and unique SCSI ID for ARS-2018E (see page 2.3.2).

Step 6: Connect ARS-2018E to the SCSI card with an external SCSI cable. Be sure

to add a terminator to the end (see 2.5 ).

Step 7: Connect ARS-2018E with a power cord.

Step 8: Power on ARS-2018E first and then the PC.

Step 9: After powering on, the system will detect a hard drive named Mirror Smart

2018. Before using it, do HDD partition and format if necessary.

Step 5: Set a proper and unique SCSI ID for ARS-2018 (see 2.3.1).

Step 6: Fasten ARS-2018 to the interior of PC with screws.

Step 7: Connect ARS-2018 to the SCSI card with an internal SCSI cable. Be sure to

add a terminator to the end (see 2.4 ).

Step 8: Connect ARS-2018 with 2 power cords to let Mirror Smart work well.

Step 9: After powering on, the system will detect a hard drive named Mirror Smart

2018. Before using it, do HDD partition and format if necessary.

NOTICE

:

(1) Be sure to unlock the tray before removing it.

(2) The provided trays are designed for ACARD ARS-2018/2018E/

2019. Do not use any substitutes without ACARD’s authorization.

ACARD will not maintain or provide any after service/warranty if

the problem is due to using a substitute.

Summary of Contents for ARS-2018























































Reviews: