ANS-9010 Panel
①
Restore from CF button, push this button to trigger an immediately restore and overwrite the
data in memories (refer to restore and backup procedures for detail operation)
②
Restore LED indicator
LED Status
Description
Steady Green for 5 seconds
CF card is ready to be manually restored
Blinking Green
CF card is under restoring
Blinking Green per 4 seconds Restore progress is under 30%
Blinking Green per 2 seconds Restore progress is between 30%~60%
Blinking Green per 1 second
Restore progress is over 60%
OFF
Restore progress is complete
③
ANS-9010 Power LED
④
P0 and P1 LED indicators
LED Status
Description
Steady Green
Power is ON
OFF
Power lose
LED
Port
Port Status
LED Status
P0 SATA Port 0
SATA port is connected
Steady Green
SATA port is being accessed Blinking Green
P1
SATA Port 1
SATA port is connected
Steady Green
SATA port is being accessed Blinking Green
⑤
CF Socket
In order to use the maximum memory size, please must install CF which is larger then or equal
to the total capacity of memories.
⑥
Battery Capacity indicators,
When the ANS-9010 was supplied with power, the battery will be automatically charging until it
is full. As soon as the power lost, the battery will take over to supply power to controller and
memories. And the controller will automatically backup data from memories to CF card (only if
CF was connected and ready to be restored). If there is no CF card installed, the battery will
support keep refresh data for memories until running out of battery.
①
⑧
②
③
④
⑤
⑥
⑦