9
AEC-67160 Ultra160 SCSI Adapter
2. Connecting more than one devices
One of the SCSI features is that you can connect two or more devices simple by
place them one after another to the host SCSI adapter serially.
Step 1: Make sure the external SCSI cable is match to the numbers of pin of
external SCSI adapter and devices.
Step 2: Plug one end of the high-density external SCSI cable into the host adapter
external connector.
Step 3: Plug the other end of the external SCSI cable into one of the connectors on
the SCSI device that you wish to connect.
Step 4: Take another external SCSI cable and plug it into the connector of previous
device. Connect the other end of the external cable to the next SCSI device
that you wish to connect.
Step 5: Repeat Step 4 as number of devices is required to be connected.
Step 6: Disable all SCSI devices’ terminators, except leave the end one to be
enabled.
2.4 Installing Both External and Internal Drives
Both external and internal devices can be installed by one adapter at the same
time. AEC-67160, can maximum connects up to 15 devices totally.
Please ensure that the last device’s external and internal cables.
