2.3 HDD Installation
1. First, open the upper casing by using a screwdriver to loosen the screws. The screws
are located at the top (1), on the sides (4) and at the back (2) of DVR as indicated by
the red circles. Remove the screws and keep them in a safe place for latter use.
Once the upper casing is removed, the internal layout can be seen. The DVD-RW rack
is on the left side while the HDD racks are on the right side.
2. And then loosen the screws holding the two HDD racks in DVR case to remove the
HDD rack, then install the HDD in place as shown below using the screws.
12
