JetStor SAS 742JD
User Manual
45
g.
CLI>fdl code
Please Use XModem Protocol for File Transmission.
Use Q or q to quit Download before starting XModem.
Offset = 0x0
h.
Select Function menu to transfer firmware file: “Function”
“Transfer”
“Send File”
“Browse”
“Open” and select the .fw file (for example:
8016-07.01.09.96-20110211.fw) from firmware folder location. Select
“XModem” Protocol to send firmware file (Only need about 60 seconds
to finish sending firmware file. If not, please repeat steps D and E
again).
Note. If won’t to transfer firmware data .fw file, Press Q or q to quit
Download before starting data transfer.
i.
Use “reset” command to Restart JBOD or power cycle
j.
Re-login to JBOD CLI.
k.
Use “sys” command to verify JBOD firmware version.
CLI>sys
l.
If needed, the “reset” command can also be used to restart the JBOD
controller. (Normally used in single JBOD Controller mode, If already to
connect to Controller )
CLI>reset
