Weighing Only Mode Setting [
NoDE_1
]
1. The default Weighing Only Mode Setting is set to ON, which means this mode is enabled.
• ON: The Weighing Mode is enabled.
• OFF: The Weighing Mode is disabled.
Dual Display Mode Setting [
NodE_2
]
1. By default, the Dual Display Mode Setting is set to ON, which means this mode is enabled.
• ON: The Dual Display Mode is enabled.
• OFF: The Dual Display Mode is disabled.
Timer Starts with Flow Mode Setting [
NodE_3
]
1. By default, the Timer Starts with Flow Mode with Droplet Setting is set to ON, which means this
mode is enabled.
• ON: The Timer Starts with Flow Mode with Droplet is enabled.
• OFF: The Timer Starts with Flow Mode with Droplet is disabled.
Auto-Tare Timer Starts with Flow Mode Setting [
NodE_4
]
1. The default Auto-Tare Timer Starts with Flow Mode with Droplet and Square Setting is set to
ON, which means this mode is enabled.
• ON: The Auto-Tare Timer Starts with Flow Mode with Droplet and Square is enabled.
• OFF: The Auto-Tare Timer Starts with Flow Mode with Droplet and Square is disabled.
Auto-Tare Auto-Start Timer Mode Setting [
NodE_5
]
1.
The default Auto-Tare Auto-Start Timer Mode with Triangle and Square Setting is set to ON,
which means this mode is enabled.
• ON: The Auto-Tare Auto-Start Timer Mode with Triangle and Square is enabled.
• OFF: The Auto-Tare Auto-Start Timer Mode with Triangle and Square is disabled.
Auto-Tare Mode Setting [
NodE_6
]
1.
The default Auto-Tare Mode with Square is set to ON, which means this mode is enabled.
• ON: The Auto-Tare Mode with Square is enabled.
• OFF: The Auto-Tare Mode with Square is disabled.
Bluetooth Setup Setting [
bt_SEt
]
1. OFF: Bluetooth is disabled. The scale does not allow any Bluetooth connection.
2. ON: Bluetooth is enabled. The scale allows Bluetooth connection. The user may connect the
scale with Acaia apps.
Battery Saving [
bAttSAvE
]
1. Save up to 20% of your battery by dimming the display after some time. It will return to its origi-
nal brightness when the scale detects objects on it.
2. The number indicates the amount of time before the scale enters battery saving mode.
3. Tap the tare button to toggle through the options.
Pre-Infusion Time Out [
PrE_inFu
]
1. Determines when the scale times out in all three of the Auto-Start modes. This is most useful
for long pre-infusion times and resolves the timeout that sometimes happens for slow pre-infusion
times.
2. The number indicates the time in seconds it will take for the scale to reset if no espresso flow or
weight is detected.
14
