AC S.A. all rights reserved. Under penalty of law and/or liability claims it is forbidden to copy, publish, distribute, make available and/or use in any way all or any part of information contained
within this document, in particular photographs, drawings, illustrations, trademarks, etc
64
Fig. 60 The view of the "Port" tab in the Menu bar
Fig. 61 Bluetooth configuration window
In order to ensure that no configuration changes are made by a third party, it is required to
activate the programming function from the cabin
– pressing the B/G switch button five times.
Programming mode is automatically deactivated after 30 seconds.
After changing the pairing code it is required to re-pair the BT interface in the system.
Every successful change in the interface configuration is confirmed with three long sounds.
If you forget the pairing code saved previously, it is possible to restore the "bt"
default code. This is possible within 60 seconds after powering the controller
–
press the switch button five times within this time.
Successful operation will be confirmed with three long sounds.
After each connection to the diagnostic application and reduction in engine speed,
the controller generates three long sounds. These are used to remind the fitter that
the fitter's interface in the customer's car.