10
G e n e r a l N o t e s !
AC Schnitzer Rear Roof Wing - F40 -
Important Notes !
These Fitting Instructions must be read in full before beginning installation work. AC Schnitzer bears no liability for
damage caused by incorrect installation !
These Fitting Instructions are intended solely for use by authorised AC Schnitzer dealers.
These Fitting Instructions are in all cases directed at professionals trained in BMW vehicles
who have the
corresponding specialist knowledge.
All diagrams show LHD vehicles, for RHD vehicles proceed accordingly or follow separate Fitting Instructions.
As manufacturer, we are obliged to point out that any changes you make to a vehicle licensed for use on public
roads require approval by a test centre and registration in the vehicle documents. As the legal regulations may vary
according to location, please contact the competent authorities for information.
Painting
Before painting, all AC Schnitzer bodystyling components
must
be checked for fit on the vehicle (e.g. contact
surfaces/contours).
Any retouching work (e.g. sanding of contact surfaces/contours) must be carried out before painting !
Painting Instructions and corresponding notes and recommendations are attached at the end of these Fitting
Instructions (see Contents).
The instructions of the paint manufacturer must be observed !
Fitting
Carry out all work in accordance with applicable safety regulations (e.g. wear safety goggles).
Components and surfaces to be glued together must first be thoroughly cleaned with cleaner !
The adhesive drying time is 24 hours. The vehicle can be washed in a car wash after approx. 48 hours.
AC Schnitzer Rear Roof Wings only in conjunction with M-Aerodynamic SA-745.
Fitting Time (1 unit = 5 minutes)
The fitting time is around
8 units
.
Painting Time (1 unit = 5 minutes)
The painting time is around
10 units
.
Fitting Instructions No.: 5131 240 310 / Issue: 19.12.2019 / TSch
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
