13
F i t t i n g I n s t r u c t i o n s
AC Schnitzer
– Aluminium Pedal Set –
2. Fitting ....
(cont'd.)
Fig. 4
On RHD vehicles (not automatic), insert the metric
countersunk head bolts Ø 3x16mm supplied in the
upper fixing points, apply the hex nuts M3 and wash-
ers U3 supplied, from behind, and tighten. At the low-
er fixing points of the AC Schnitzer aluminium pedals,
attach the backing plate supplied and tighten with the
Ø 3x16mm metric bolt supplied so that the standard
pedal is clamped between the backing plate and the
AC Schnitzer aluminium pedal.
Fig. 5
Thoroughly clean the contact face of the standard gas pe-
dal with a suitable cleaner, e.g. brake cleaner.
Fitting Instructions No.: 3520 10 (20) 110-120-130-310 / Issue: 26.06.2017/ TSch / REV01
AC Schnitzer - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130 Fax -135 / www.ac-schnitzer.de
