ƶƱ
Steps
Procedure
3. Remove grille and panel
Twist off the screws connecting the
grille and panel, and then remove the
grille.
Twist off the screws connecting the
panel, chassis and motor support with
screwdriver, and then remove the panel
4. Remove right side plate
Twist off the screws connecting the
right side plate and chassis, valve sup-
port and condenser, and then remove
the right side plate.
5. Remove axial flow blade
Twist off the nuts on blade with wrench
and then remove the axial flow blade.
grille
panel
right side plate
axial flow blade
