Technical Information
Ƴ
1.
ON/OFF Button
Pressing this button will turn on or turn off the air conditioner. When on, the green operation indicator on indoor units
display will be on (color will vary for different models), and the indoor unit will make a sound.
2.
S
Button
Pressing this button will increase the set temperature by one degree per click. Holding the button down for more than 2
seconds will rapidly increase the set temperature. In AUTO MODE, the set temperature is not adjustable.
3. MODE Button
Press this button to select your required operation mode. Pressing this button will change mode: AUTO, COOL, DRY,
FAN, and HEAT will be set circularly in this sequence. AUTO MODE defaults when turning on the power. In AUTO
MODE, set temperature cannot be adjusted and will not be displayed on the LCD.
4. SWING Button
Pressing the SWING button will adjust the fan blowing angle, which changes circularly below.
5.
T
Button
Pressing this button will decrease the set temperature by one degree per click. Holding the button down for more than 2
seconds will rapidly increase the set temperature. In AUTO MODE, the set temperature is not adjustable.
6. FAN Button
This button is used for setting fan speed. Pressing this button will change fan speed: AUTO, LOW, MEDIUM-LOW,
MEDIUM, MEDIUM HIGH, HIGH will be set circularly in this sequence. When turning on the unit, AUTO fan speed is the
default setting. In DRY mode, the fan speed can only be set to LOW.
7. TIMER OFF Button
Press this button to initiate the auto-off timer. To cancel auto-off timer, simply press the button again. TIMER OFF
setting is the same as TIMER ON.
8. CLOCK Button
Press and hold this button to initiate CLOCK set. Within 5 seconds, press + or - buttons to adjust the time value.
Each pressing of the + or - buttons will increase or decrease the time by one minute. Holding down these buttons for 2
seconds will increase or decrease the time in 10 minute intervals. Press the clock button again to confirm time. will be
constantly displayed.
9. TIMER ON Button
Pressing this button will initiate AUTO-ON timer. To cancel, simply press this button again.
10. SLEEP Button
Press this button to enter SLEEP operation mode. Pressing it again will cancel SLEEP function. This function available
in COOL and HEAT modes.
11. TEMP Button
Pressing this button will reveal the indoor set temperature and the indoor ambient temperature on the display of the
indoor unit. The setting is selected circularly as shown below:
NOTE:
• TEMP button is only for models with temperature indicator on indoor unit.
• Set temperature is defaulted to display on indoor unit during power up.
• Outdoor ambient temperature display is not available for models.
AUTO
COOL
DRY
FAN
HEAT
*
OFF
Summary of Contents for AWH18QD-D3DNA1G/O
Page 2: ......