AC Infinity THERMOFORGE Series, User Manual

Page: 33 / 40

33
OTHER SETTINGS
HIDE SCREEN
Lock your heater so no settings can be adjusted. See above.
Then press the setting button to turn the display off. Pressing it
again will turn the display back on. Programs will still run in the
background while the LCD screen is off.
PRESS +
CONTROLLER LOCK
Holding the setting button will lock your heater in your current
mode. While your heater is locked, no parameters may be
adjusted, nor will you be able to switch modes or functions.
Holding the setting button again will unlock your heater.
HOLD +
FACTORY RESET
Holding the mode, up, and down buttons together for 5 seconds
will reset your heater and restore factory settings. This clears all
user parameters in each mode and setting.
HOLD +
SWITCH FUNCTION
Holding the mode and setting buttons for 3 seconds will switch
your heater between the HEAT and FAN functions. This switching
is disabled if the controller is locked.
HOLD +