AC Infinity CONTROLLER 75, Manual

Page: 19 / 44

19
AUTO MODE (HIGH HUMIDITY TRIGGER)
Pressing the up or down button sets the high humidity
trigger. Your device will turn on if the probe’s reading
meets or exceeds this threshold.
If the probe’s reading falls below this trigger point,
your device will turn off. This shut off point can be adjusted
using the buffer setting as shown on
page 29.
This is typically used with devices like dehumidifiers
to help lower the humidity when it gets too humid. For
example, if you set a high humidity trigger of 70%, then
your device will activate when the humidity rises to 70%
or higher, and turn off when it falls below 70%. Products
shown here may still be in development.
PROGRAMMING
Note that any of the four AUTO Mode triggers can activate at the same time, even if you are not viewing that
specific trigger. Turn off any triggers not in use by pressing the up and down buttons together while viewing that
trigger. Triggers may be delayed from turning off by your Buffer Settings, please see page 27 for more info.
ON
HIGH HUMIDITY
TRIGGER POINT
OFF
70
32 100
LESS HUMID MORE HUMID