25
CALIBRATION TEMPERATURE SETTING
In this setting, adjust the temperature reading that
the sensor probe is measuring. Press the up or down
button to increase or decrease the data figure by 2°F
(or 1°C) increments. The calibration cycle ranges
from -8°F to 8°F (or -4°C to 4°C) and will be applied
to the sensor probe’s measurements.
CALIBRATION HUMIDITY SETTING
In this setting, adjust the real humidity reading that
the sensor probe is measuring. Press the up or down
button to increase or decrease the data figure by
1% increments. The calibration cycle ranges from
-8% to 8% and will be applied to the sensor probe’s
measurements.
CLOCK SETTING
In this setting, adjust the current clock time. Press
the up or down button to increase or decrease the
time. Once you cycle through 12:00 each time, the
units will automatically change to AM or PM. The
current clock time will be shown at the lower left
corner of the display.
PROGRAMMING
CLOCK
PM
PM
PM
CALIB.
T°
PM
CALIB.
H%
%
Summary of Contents for AC-SMA1
Page 1: ...SUNCORE SEEDLING HEATING MAT USER MANUAL ...
Page 2: ......
Page 32: ...www acinfinity com ...
