background image

17

5. PROBE TEMPERATURE

Current temperature that the probe is detecting. Displays “--“ if no probe is plugged in. Includes a 
trend indicator that signals a rise, steady, or fall in temperature within the last hour.

9. CURRENT TIME

 

Displays the current time. The internal battery sustains the clock so it does not default to 00:00 if
power is cut off. Please see page 18 for instructions on how to set up the clock time.

7. CONTROLLER MODE

Displays the mode that the controller is currently in. Pressing the mode button cycles through the 
available modes.

10. COUNTDOWN

Displays TO ON or TO OFF countdown to show the amount of time before the timer to on, timer to 
off, cycle, or schedule modes activates or deactivates the fan. TO ON represents the amount of 
time that is left before your device turns on. TO OFF represents the amount of time that is left 
before your device turns off. 

11. USER SETTING

Displays the value you have set for the current mode that you are in. Press the up or down button 
to adjust the value.

8. STATUS ICONS

Flashes or displays the alert icons from the controller. Icons include TIMER ALERT and DISPLAY 
LOCK.

6. PROBE HUMIDITY

Current humidity that the probe is detecting. Displays “--“ if no probe is plugged in. Includes a trend 
indicator that signals a rise, steady, or fall in humidity within the last hour.

PROGRAMMING

Summary of Contents for AC-SMA1

































Reviews: